[Anonymous]

Okay, hopefully this works and doesn’t turn into a fail thread like all the previous ones…

Cars and Coffee was held at the Rancho Carillo private community this weekend as Mazda was using the regular CNC location for a special Mazda event.

[img]http://cncpics.net/d/51001-2/DSC02520.JPG[/img]
[img]http://cncpics.net/d/50175-2/DSC02522.JPG[/img]
[img]http://cncpics.net/d/50186-2/DSC02525.JPG[/img]
[img]http://cncpics.net/d/50191-2/DSC02526.JPG[/img]
[img]http://cncpics.net/d/50201-2/DSC02528.JPG[/img]
[img]http://cncpics.net/d/50206-2/DSC02529.JPG[/img]
[img]http://cncpics.net/d/50216-2/DSC02531.JPG[/img]
[img]http://cncpics.net/d/50226-2/DSC02533.JPG[/img]
[img]http://cncpics.net/d/50231-2/DSC02535.JPG[/img]
[img]http://cncpics.net/d/50261-2/DSC02541.JPG[/img]
[img]http://cncpics.net/d/50276-2/DSC02544.JPG[/img]
[img]http://cncpics.net/d/50306-2/DSC02550.JPG[/img]
[img]http://cncpics.net/d/50326-2/DSC02554.JPG[/img]
[img]http://cncpics.net/d/50371-2/DSC02563.JPG[/img]
[img]http://cncpics.net/d/50416-2/DSC02572.JPG[/img]
[img]http://cncpics.net/d/50431-2/DSC02577.JPG[/img]
[img]http://cncpics.net/d/50446-2/DSC02580.JPG[/img]
[img]http://cncpics.net/d/50451-2/DSC02581.JPG[/img]
[img]http://cncpics.net/d/50456-2/DSC02583.JPG[/img]
[img]http://cncpics.net/d/50481-2/DSC02589.JPG[/img]
[img]http://cncpics.net/d/50511-2/DSC02595.JPG[/img]
[img]http://cncpics.net/d/50516-2/DSC02596.JPG[/img]
[img]http://cncpics.net/d/50536-2/DSC02600.JPG[/img]
[img]http://cncpics.net/d/50556-2/DSC02604.JPG[/img]
[img]http://cncpics.net/d/50766-2/DSC02646.JPG[/img]
[img]http://cncpics.net/d/50726-2/DSC02638.JPG[/img]
[img]http://cncpics.net/d/50706-2/DSC02634.JPG[/img]
[img]http://cncpics.net/d/50821-2/DSC02657.JPG[/img]
[img]http://cncpics.net/d/50906-2/DSC02674.JPG[/img]
[img]http://cncpics.net/d/50896-2/DSC02672.JPG[/img]
[img]http://cncpics.net/d/50891-2/DSC02671.JPG[/img]
[img]http://cncpics.net/d/50931-2/DSC02681.JPG[/img]

Chasing a Merak SS
[img]http://cncpics.net/d/50976-2/DSC02690.JPG[/img]

As always feel free to share these photos with other forums and don’t forget to visit CNCpics for more photos.

Thanks,

-Leo

[Author]

Posts